.
.

Rocks and Ruts is an online off-road powersports community featuring industry news, product reviews and off-road industry related discussion.

.

Muzzy Digituner Pro – Can-Am Renegade 1000 Review


Share this on...
Share on FacebookShare on Google+Tweet about this on TwitterShare on StumbleUponDigg thisPin on PinterestShare on LinkedIn

Review Submitted by Member “Gaderider13”

To match the muzzy exhaust system i installed, i went with the muzzy digituner pro. I purchased this unit from VForceJohn. He uploads his own custom tune onto these, one that he worked on for weeks, to be as close to perfect as you can with the exhaust system and the 1000. Plug and play, and the machine will run like it should.

Install was easy, theres 2 wires. A single black ground, which is ran to the negative on the battery, and then theres the group of loomed wires for the injectors. There will be 4 connectors, 2 groups of 2. Its as simple as popping off the right side cover, route the wires so they clear everything, unplug the injector. Plug the grey plug from the tuner into the injector and plug the black plug into the original injector plug. be sure to do that on both cylinders and thats it. Took me approx. an hour to install, the hardest part being wire routing. I have the tuner sitting under the dash, high and dry. Adjusting the tuner if desired is very easy. At first it can seem daunting, but once you try it, its not bad at all.

It was pretty much perfectly set up from John, runs really well, much cooler and noticeable power gains. I did have to slightly adjust the “green” range which is low end, because during engine braking it would pop slightly. After adding one click to the “green” range, doesnt do it anymore. I highly recommend this setup.


Share this on...
Share on FacebookShare on Google+Tweet about this on TwitterShare on StumbleUponDigg thisPin on PinterestShare on LinkedIn